Downloads

Cisco ATA 191 & 192

Firmware upgrade:
Use the Administration > Firmware Upgrade page to upgrade the firmware on the ATA. It is not necessary to upgrade unless you are experiencing problems with the ATA or if the new firmware has a feature that you want to use.

Caution:
Upgrading the firmware may take several minutes. Until the process is complete, DO NOT turn off the power, press the hardware reset button, or click the Back button in your current browser.

Before you begin:
Before upgrading the firmware, download the firmware upgrade file for the ATA.

Upgrade procedure:
  1. Click Browse and select the location of the upgrade file that you downloaded.
  2. Click the Upgrade button to upgrade the firmware.

ATA with Firmware Release 11.1.0MSR3-9 and Older Doesn't Upgrade:
ATA with firmware version 11.1.0MSR3-9 and older fails to upgrade to the later releases if the server is implemented as HTTP chunk mode and the chunk-size is greater than 16K. (ATA with Firmware Release 11.1.0MSR3-9 and Older Doesn't Upgrade)

To bypass this upgrade failure, we recomment you to use this external HTTP server.

http://54.187.133.72/ata/ATA19x.11-1-0MPP0414-004.img
Changelog
version 11.2(1)

Cisco SPA112 & SPA122

Manual Update Instructions:
  1. Download the attached file to your computer and unzip it to your desktop.

  2. Access the adapter Configuration Utility in one of the following two ways:

    • If the adapter is SPA112, connect one analog phone to its FXS port, press * * * * to access IVR, enter 110 to get SPA112 WAN IP address. Then, launch a web browser, and enter WAN IP address.

    • If the adapter is SPA122, connect one PC to its LAN port. Then, launch a web browser, and enter the LAN IP address. The default value is 192.168.15.1.

  3. Log in to the Configuration Utility.

  4. Click "Administration" in the menu bar, and then click "Firmware Upgrade" in the navigation tree.

  5. Click "Browse" and select the location of the upgrade file that you downloaded.

  6. Click the "Upgrade" button to upgrade the firmware.
Changelog
version 1.4(1)SR5

A Hook Flash is nothing more than hanging up and picki…

Thank-you extremely helpful. What would I do if for s…

Am not sure where my Grandstream HT813 was sourced from…

My HT801 was configured for another UK provider. I rea…

Sign up for VIP membership