Linksys PAP2
-
1. Extract the “linksys-pap2-v3-1-22-ls.zip” file to your desktop.
2. Locate and run the file “pap2-3-1-22-LS.exe”.
2. Locate and run the file “pap2-3-1-22-LS.exe”.
Once you run it, you will see a message as shown below:
3. Click “Upgrade Firmware”
It will throw out a warning message as shown below:
4. Click “Continue”
5. Enter the IP address of your PAP2 adaptor.
Using an analog phone connected to either line port 1 or 2, lift the handset and press the asterisk key 4 times **** on your telephones keypad.
An automated voice response will ask you to enter a configuration option, press 110# on your telephones keypad. The current IP address assigned to your Linksys PAP2 will be read back to you.
Enter the IP address in the "Please enter IP address of your SPA:" field as shown in the image below:
6. Click “OK”
7. Click “Upgrade” to start the firmware upgrade
It will show you the progress of the firmware upgrade and will take around 1 minute to complete.
8. Click “OK” to finalise the upgrade process
version 3.1.22(LS)