Downloads

Manual Update Instructions:

Download the attached file to your computer and unzip it to your desktop.
Access the web interface page of the OBi device:
- From a phone attached to the PHONE port of the OBi dial * * * 1
- The IP address of the OBi will be read to you.
- Open a new browser window on your PC and enter the IP address of the OBi.
  E.g. 192.168.1.110
- When prompted, enter "admin" for username and "admin" for password.
  Note: If you have previously changed the password, use that instead of "admin".
Now that you have accessed the OBi web interface page, go to the "System Management" - "Device Update" page. From there, under the "Firmware Update" section click "Choose File" and browse to the firmware file you just unzipped to your desktop, once selected click "Update".
Wait for the OBi to restart (approx. 30-60 seconds).

version 1.3.0 (Build: 2886)

Manual Update Instructions:

Download the attached file to your computer and unzip it to your desktop.
Access the web interface page of the OBi device:
- From a phone attached to the PHONE port of the OBi dial * * * 1
- The IP address of the OBi will be read to you.
- Open a new browser window on your PC and enter the IP address of the OBi.
  E.g. 192.168.1.110
- When prompted, enter "admin" for username and "admin" for password.
  Note: If you have previously changed the password, use that instead of "admin".
- OBi202/OBi302 Note: To access the OBi via the LAN port, by default the LAN port IP (Gateway) address is: 192.168.10.1
- OBi202/OBi302 Note: To access the integral web page via the WAN port, you may need to enable WAN access. To do this, from the connected phone dial * * * 0. Next, enter 30# - Press 1 to enter a new value - Press 1# to enable - Press 1 to save.
Now that you have accessed the OBi web interface page, go to the "System Management" - "Device Update" page. From there, under the "Firmware Update" section click "Choose File" and browse to the firmware file you just unzipped to your desktop, once selected click "Update".
Wait for the OBi to restart (approx. 30-60 seconds).

version 3.2.2 (Build: 6259)

Manual Update Instructions:

Download the attached file to your computer and unzip it to your desktop.
Access the web interface page of the OBi device:
- From a phone attached to the PHONE port of the OBi dial * * * 1
- The IP address of the OBi will be read to you.
- Open a new browser window on your PC and enter the IP address of the OBi.
  E.g. 192.168.1.110
- When prompted, enter "admin" for username and "admin" for password.
  Note: If you have previously changed the password, use that instead of "admin".
Now that you have accessed the OBi web interface page, go to the "System Management" - "Device Update" page. From there, under the "Firmware Update" section click "Choose File" and browse to the firmware file you just unzipped to your desktop, once selected click "Update".
Wait for the OBi to restart (approx. 30-60 seconds).

version 4.0.5 (Build: 5980)

HELLO & WELCOME