VoIP Hardware Accessories

VoIP and IP PBX compatible hardware

We are a Support Forum - not just a retailer - so we only sell equipment that we know works well with the majority of VoIP networks and unlike some service providers who lock their telephones and adapters, our hardware is unlocked so you can change it's configuration and use it with a VoIP provider of your choosing.

All our telephones and adapters are pre-configured with UK ring and dial tones, include a UK Power supply (Excludes Power over Ethernet (PoE) devices) and ALL UK BT compatible adapters and cables – so you should be able to just plug them into your home or office network and once configured with your VoIP credentials you can start making calls straight away.

To get the most out of internet telephony, particularly if you are using it for business, it's best to use the new generation of VoIP (SIP) telephones or for the home user that does not require the features and functionality of a hardware phone we would recommend a VoIP analouge telephone adapter (ATA). They don't need your PC to be switched on or use PC resources and they deliver higher voice quality with more functionality than softphones.

Because we pre-configure your device with UK phone settings, include a UK Power supply (Excludes Power over Ethernet (PoE) devices) and ALL UK BT compatible adapters and cables before we send it to you, your packaging will have been opened.

RJ11 to BT Adapter W/Ring Capacitor
RJ11 to BT Adapter W/Ring Capacitor

This adapter enables you to connect a BT plug to an RJ11 (us style) socket and comes complete with its own internal ringing capacitor to enable your UK phone to ring for incoming calls when connected to a foreign telephone system. Compatible with all telephone systems using standard BT and US sockets.

The adapter is a full PSTN master and will work with any UK phone & phone system. Perfect for use with your BT telephone with your VoIP (sip & skype) phone adapter, take it with you if your emigrating or on holiday to enable you to use your existing BT phone with the foreign telephone exchange.

£3.99 & FREE Delivery in the UK. Read more
BT to RJ11 2 Pin Cable (for FXO) 1.75m
BT to RJ11 2 Pin Cable (for FXO) 1.75m

Simple to install. This cable enables you to connect an FXO analouge telephone adapter (ATA) such as the OBIHAI OBi110 to any UK NTE5 PSTN master socket. This cable is made from high quality CAT5e cable, features 2 pins at both ends and is wired straight-through.

Suitable for use with the Gigaset N300 base station, OBIHAI OBiLINE FXO to USB Phone Line Adapter and both the OBIHAI OBi110 and OBIHAI OBi212 FXO analogue telephone adapters (ATA’s).

£6.99 & FREE Delivery in the UK. Read more
Replacement Curly Cord (Black)
Replacement Curly Cord (Black)

Need a Replacement Curly Cord for your IP telephone? These replacement curly cords are simple to install, approximately 35cm long (not stretched) and Black in colour. The long tail is 16cm long and the short tail is 3cm long. They come with a 4 pin RJ9 plug at both ends.

Can be used as a replacement cable! May be used to replace a faulty cable, or simply to extend your Handset. Suitable for use with both the Yealink T4 series, Snom D3XX and Snom D7XX series IP telephones.

£9.99 & FREE Delivery in the UK. Read more

Supported Products: OBi200 OBi202 OBi300 OB…

Due to high bandwidth usage (over 1TB a month) and…

Not an iPhone user but is there an option to switc…

UPDATE: Just got a reply via email from Voicehos…

Sign up for full membership