VoIP hardware is developing fast - this is where you ask all those “how do I make my SIP Telephone, Adapter or Asterisk box work with my voip provider?” questions.
0
User avatar
By WelshPaul
Posts Signature Likes Avatar Topics
#5863
Hi @LilJoe and welcome to the forums. 👋🏻

While I don't have any hands on experience installing the Snom PA1, you will be pleased to hear that installation looks rather straight forward. Start by reading through this document. Look on page 9 where it talks about Connecting the PA1. Basically, the speaker connects to the Snom PA1 via push on terminals as shown in attachment image below.
LilJoe wrote: Sun 31st May 2020, 19:01what speakers did you use?
There is no one speaker fits all kind answer unfortunately so pick whatever one fits your budget. Just make sure that you choose one that is suitable for the environment you intend on installing it in.

Snom PA1 speaker push on terminals:
Attachments:
(Black is negative and red is positive)
(Black is negative and red is positive)
pa1-speaker-connection.jpg (59.73 KiB) Viewed 1160 times
0
Cisco 8841 3PCC

Before we go any further... Can you verify that the d…

VIP Membership

Good stuff, I see it now. Thanks @WelshPaul !

You can register multiple devices against the same SI…

I'm sure this is a config problem as it affects 3 off S…

Sign up for VIP membership