I inserted your solution and it worked but there was a long delay after the last digit before the called number rang
I had also posted on the obitalk forum before about the delay and they modified my map to the one I posted as you can see it is slightly different at the end there is only one +xx
I was advised to remove the other xx in the rules to prevent the long delay in connecting heres a link to the topic
http://www.obitalk.com/forum/index.php? ... 7#msg58357
I also posted over there about this problem i have now dialing 06728158 and they told me
You are correct - eight digits starting 06 seems to be one of the few numbers not allowed for in your digitmap.
Simply add this rule anywhere in the digit map ...existing rules...|06xxxxxx|...existing rules...
There is a potential problem between the new rule and this existing rule: 0xxxxxxxx
If you are dialling a ten digit number beginning 06, then our new rule would match after only the first eight digits have been dialled. However, as you are using a dect phone that sends all the digits to the OBi100 in one fast stream, then this should not be a problem for you.
Anyone in a similar situation using a conventional corded phone and maybe dialling more slowly should add a delay to the new rule like so: ...existing rules...|06xxxxxxS3|...existing rules... This would add a three second delay after dialling the eighth digit so allowing the user to carry on to nine, ten or more digits without being prematurely matched by the eight digit rule.
Bet you thought you were going to get a simple answer
I inserted and here is my map now and it works now with no delay ringing out thanks again
Code: Select all