VoIP hardware is developing fast - this is where you ask all those “how do I make my SIP Telephone, Adapter or Asterisk box work with my voip provider?” questions.
User avatar
By WelshPaul
#827
The only thing I think it could be is is this part: 08[2-9]5xxxxxxx
So I have removed it from the dialplan and now we have this:
Code: Select all
(112|999|[2-9]xxxxxx|023[2-9]xxxxxx|02[24-9][2-9]xxxx|01[2-9]xxxxxx|118xx|04[0-79]xxxxxxx|06xxxxxxxS2|0[5679]xxxxxxxx|0818xxxxxx|08[2-9]xxxxxxx|18xxxxxxxx|15xxxxxxxx|048xxxxxxxx|00442xxxxxxxxx|00441xxxxxxxxx|00443xxxxxxxxx|00447xxxxxxxxx|00448xxxxxxxxx|00449xxxxxxxxx|0033xxxxxxxxx|001xxxxxxxxxx|0034xxxxxxxxx|00x.|19xx|171|14x.|<10:3000>|<1191:303>|xx.|+xx.|(Mipd)|[^*#]@@.)
Sadly I can't test these Irish numbers myself. If you can test this last dialplan for me that would be great!

I will have to get Mark over at Obihai to test if it still fails.
By mylesm
#828
WelshPaul wrote:The only thing I think it could be is is this part: 08[2-9]5xxxxxxx
So I have removed it from the dialplan and now we have this:
Code: Select all
(112|999|[2-9]xxxxxx|023[2-9]xxxxxx|02[24-9][2-9]xxxx|01[2-9]xxxxxx|118xx|04[0-79]xxxxxxx|06xxxxxxxS2|0[5679]xxxxxxxx|0818xxxxxx|08[2-9]xxxxxxx|18xxxxxxxx|15xxxxxxxx|048xxxxxxxx|00442xxxxxxxxx|00441xxxxxxxxx|00443xxxxxxxxx|00447xxxxxxxxx|00448xxxxxxxxx|00449xxxxxxxxx|0033xxxxxxxxx|001xxxxxxxxxx|0034xxxxxxxxx|00x.|19xx|171|14x.|<10:3000>|<1191:303>|xx.|+xx.|(Mipd)|[^*#]@@.)
Sadly I can't test these Irish numbers myself. If you can test this last dialplan for me that would be great!

I will have to get Mark over at Obihai to test if it still fails.
tried that it works but approx 7 sec delay before I hear ring tone but could that be just how long it takes to route but probably not because if I dial my mobile and put # at the end it connects within 4 secs every time, remove hash and it takes 7 secs
User avatar
By WelshPaul
#829
I have emailed Mark with a link to this thread.

You could just put you mobile number in brackets as your dialplan to test. For example (1234567890)

There Is usually a longer delay hearing the ring ring when calling mobiles. If it is a routing issue doing the above will confirm this but seeing as the call connects quicker pressing the # key indicates a dialplan issue. Which is odd as it should be fine.

See what Mark thinks.
By mylesm
#830
Ok

Tried dialplan with just (mymobile) in my digimap and it rings within 4 secs every time

replaced digimap with
Code: Select all
(112|999|[2-9]xxxxxx|023[2-9]xxxxxx|02[24-9][2-9]xxxx|01[2-9]xxxxxx|118xx|04[0-79]xxxxxxx|06xxxxxxxS2|0[5679]xxxxxxxx|0818xxxxxx|08[2-9]xxxxxxx|18xxxxxxxx|15xxxxxxxx|048xxxxxxxx|00442xxxxxxxxx|00441xxxxxxxxx|00443xxxxxxxxx|00447xxxxxxxxx|00448xxxxxxxxx|00449xxxxxxxxx|0033xxxxxxxxx|001xxxxxxxxxx|0034xxxxxxxxx|00x.|19xx|171|14x.|<10:3000>|<1191:303>|xx.|+xx.|(Mipd)|[^*#]@@.)
and it takes at least 7 secs but usually 8-9secs
User avatar
By WelshPaul
#832
Ok, I am in front of my PC this morning and I thought I would take another look at this with fresh eyes... :shock:

I just inserted:
Code: Select all
(112|999|[2-9]xxxxxx|023[2-9]xxxxxx|02[24-9][2-9]xxxx|01[2-9]xxxxxx|118xx|04[0-79]xxxxxxx|06xxxxxxxS2|0[5679]xxxxxxxx|0818xxxxxx|08[2-9][012346789]xxxxxx|08[2-9]5xxxxxxx|18xxxxxxxx|15xxxxxxxx|048xxxxxxxx|00442xxxxxxxxx|00441xxxxxxxxx|00443xxxxxxxxx|00447xxxxxxxxx|00448xxxxxxxxx|00449xxxxxxxxx|0033xxxxxxxxx|001xxxxxxxxxx|0034xxxxxxxxx|00x.|19xx|171|14x.|<10:3000>|<1191:303>|xx.|+xx.|(Mipd)|[^*#]@@.)
In to my OBi1032 and tried calling an Irish mobile number and it works just fine.

It takes 2 seconds to match the number to the dialplan and start the call process as it should. I also tried dialling an 067xxxxxx number and that too successfully matched and processed the call within 2 seconds.

I was going to ask if you were correctly inserting the diaplan against the correct SPx but you must be if 067 numbers are working.

On another note... Change:
Physical Interfaces > PHONE Port > DigitMapLongTimer: 6

Numbers not matched to any dialplan string will now dial in 6 seconds instead of the default 10.
User avatar
By WelshPaul
#836
No it is the just the Irish Digimap taken from the Irish XML settings file as posted earlier. All I added to it was 06xxxxxxxS2 so that calls can be made to those 06 numbers of yours.

The map is 100% ok and working here. Like I said I tested it on the OBi1032 which has a screen so you can physically see what's happening.
By mylesm
#837
tried again still the same 7-8 secs to ring mobile , 4 secs when i place # at end of number

On another note... Change:
Physical Interfaces > PHONE Port > DigitMapLongTimer: 6

I cant find this on DigitMapLongTimer on my obi-100 i can find physical interfaces phone port but that timer is not listed

Its not a major issue but 7-8secs is a long time if you count it out
User avatar
By WelshPaul
#839
mylesm wrote:just to be sure as i said i am new to this i am pasting that digitmap into

ITSP -Profile A -General-Digitmap
If your voip provider is setup against that profile then yes. :)

I just put this dialplan viewtopic.php?f=10&t=364&p=839#p832 into a OBi202 and dialled 0876123456 from a dect phone and within 2-3 seconds had my voip provider inform me the call couldn't be connected. Which is correct as it does not exist here in the UK and I didn't use any international prefix.

So the dialplan is working for me. I am stumped as to why it will not work for you! :*Bleep*:

I might see if I can get a hold of a OBi100/110 as these appear to be the ones that require the most support. Would be handy to have one to test at times like this.

I did drop Mark that email last night, maybe he will have an idea. I know he is very busy so not sure when he will get back with any advice but hopefully he will reply soon. :thumbsup:
By mylesm
#840
Thanks very much

Just to let you know I had a Siemens Gigaset A580ip which is an Ip Dect phone and this was setup with my provider

I got OBI-100 and Siemens C620a dect phone as this phone had ability to block numbers etc so i presumed I was really only moving the IP part to OBI

I just now reconnected my Gigaset A580ip and let it register with my provider and then registered the C620a handsets to it as extra handsets

i then dialled my mobile and it connected immediatly so it would seem the delay is being caused by obi100 as my old ip phone works
User avatar
By WelshPaul
#841
How do you configure the OBi100? Via the OBiTALK portal or local web based GUI?

If you set up the OBi100 via the portal and you are now making the changes via the local web based GUI it could be the portal overwriting the changes and replacing the new dialplan with the old one.

If you're making the changes via the OBiTALK portal are you leaving enough time for the device to update?
Who is online

Users browsing this forum: CommonCrawl [Bot] and 0 guests

Landline bridge advice

Factory reset your OBi after updating it's firmwar…

Yep, good phones too! The Cisco SPA phones are na…

Hi Phil, Thanks for coming back to us and confirm…

Grandstream GXP1610 IP Phone

Description - Grandstream GXP 1610 IP Phone HD w…