Get help with installing, upgrading and running a PBX such as Asterisk.
100 %
By alex01
#4338
Hi.

I have an account with Localphone but am having problems making outgoing call with my pbx. I have the trunk set up with what I think are correct settings but when I try to make an outgoing call I get all circuits are busy now.

my system is freepbx 13, all my other trunks work fine on outgoing, if I go to outbound route and just change the trunk to another, then I am able to make an outgoing call, but if I change back to localphone trunk I get the all circuits message. I think I must have the trunk configured incorrectly. has anyone got a trunk set using Localphone? please could someone tell what settings they are using? I have tried contacting localphone support but have not heard back from them yet.

I am using the following settings:
username=(sipid)
type=peer
secret=(password)
qualify=yes
nat=never
insecure=very
host=localphone.com
fromuser=(sipid)
fromdomain=mydomain.com
dtmfmode=rfc2833
disallow=all
context=from-trunk
canreinvite=no
authuser=(sipid)
allow=ulaw
Register string:

(sipid):(sip password)@localphone.com/(sipid)
User avatar
By WelshPaul
#4340
Try the following:

type = friend
insecure = very
nat = no
canreinvite = no
authuser = [SIP ID]
username = [SIP ID]
fromuser = [SIP ID]
fromdomain = localphone.com
secret = [SIP Password]
host = localphone.com
dtmfmode = rfc2833
context = from-trunk
disallow = all
allow = ulaw

Register string:

(sipid):(sip password)@localphone.com/(sipid)
alex01 liked this

OK thanks, what VPN are you using ??

A good write up on SIP ALG: https://www.voicehost…

Thanks very much. Really appreciate it! :-D

Attached below is my latest OBIHAI UK configuratio…