Get help with installing, upgrading and running a PBX such as Asterisk.
User avatar
By Filip M
Posts Avatar Topics
#4806
I create IP trunk (H323) between two NS500. Ext. numbers of the first one are 1xx, ext. numbers of the second one are 2xx. I have CO lines only in PBX 1. Configuration of the IP trunk between two PBX is correct because i can dial the extensions from PBX 1 to PBX 2. The IP trunk is TG 7 and he has COS 1. When i try to dial(807+9) from PBX 2 through CO lines of PBX 1, the dial can't be completed. Does anyone know what the problem is ??? Thank you in advance !
0
User avatar
By WelshPaul
Posts Signature Likes Avatar Topics
#4811
I'm not familiar with the Panasonic NS500, but this sounds like a call routing issue.
0
0

I have two asterisk servers (1 running asterisk (box1) …

Sipgate Basic and multiple SIP clients

Ok, thanks. Was worried that using the same sip user in…

Your device was probably listed on Cisco's provisioning…

This means it is very dangerous to post here other t…

Sign up for VIP membership