Get help with installing, upgrading and running a PBX such as Asterisk.
User avatar
By Dsarl
Posts Avatar Topics
#164
When trying to call a number in Denmark I get the following in my /var/log/asterisk/full

Jan 17 11:51:46 WARNING[31573] chan_sip.c: Forbidden - wrong password on authentication for INVITE to '"xxxxx" <sip>;tag=as1747dacc'

xxx= account number

The 'all circuits are busy' message is played to the person attempting the call and the call fails.

Other outbound calls are working fine apart from this number.

Any ideas what this could be?

Thanks!
0
User avatar
By WelshPaul
Posts Signature Likes Avatar Topics
#165
You'll normally see forbidden if one of your VoIP providers carriers cannot connect your call.

Try emailing your VoIP providers support desk and they should be able to check the routing to the destination you're having problems with.
0
Sipgate Basic and multiple SIP clients

Ok, thanks. Was worried that using the same sip user in…

Your device was probably listed on Cisco's provisioning…

This means it is very dangerous to post here other t…

https://www.ukvoipforums.com/viewtopic.php?t=58#p5950

Sign up for VIP membership