Get help with installing, upgrading and running a PBX such as Asterisk.
User avatar
By tonys102
Posts Avatar Topics
#3860
Hi All,

I am connecting an asterisk to a Pansonic, and am getting 1 way voice. The SIP config is correct, so
asterisk = 172.16.10.196
Panasonic = 172.16.20.1

It's a flat network.
The RTP from the Panasonic comes from 172.16.20.2 (which is the IP address of the DSP), but the asterisk is sending to the main IP address. I can hear the voice from the Panasonic, but they can't hear me - because of the above.

Any Panasonic guru's who can advise what needs to be changed.?
0
User avatar
By WelshPaul
Posts Signature Likes Avatar Topics
#3861
Have a read of this: http://www.voicesonic.com/panasonic/man ... NCPxxx.pdf

Never liked any of the Panasonic stuff myself, put both on the same subnet/IP range of 172.16.10.x
0
0

Hi @nasarz the PJSIP trunk settings for a Sipgate B…

Anyway, first things first. You need to get your TFTP…

I have no first hand experience with these devices but …

Openstage 40 not updating FW

I don't think the issue you're having is caused by the …

Sign up for VIP membership