Advertisement

By Sponsor
By GoofyCyborg
#55
Updating firmware on the Cisco SPA122 VoIP ATA is exactly the same procedure as with the Cisco SPA112 VoIP ATA. After all, they both use the same common firmware versions and .bin files; and thus, all common functions work the same on both ATA's.... even the firmware upgrade procedure.
SPA112_update_firmware.jpg
SPA112_update_firmware.jpg (25.87 KiB) Viewed 1814 times
So, with that in mind, the procedure outlined here becomes very straight forward:
  1. Download the latest firmware version available from Cisco Support web site:
    Latest SPA122 Firmware Download.
  2. Follow my procedure outlined in the SPA112 firmware upgrade thread:
    "How to Update the Firmware on a Cisco SPA112"
That's it. We're done.
I wish all my articles were this easy... :mrgreen:

I bet it took you about 10 secs to work it out! …

Yes changing power save mode to disable fixed it. …

Hi iantor, Have you tried setting NAT Keeplive En…

Obihai have just release a new firmware version fo…

Check out our Amazon top picks