User avatar
By WelshPaul
Posts Signature Likes Avatar Topics
#199
Please firstly make sure you have the lastest avaialble frimware from http://wiki.snom.com/Snom_m3/Firmware

Step 1
  • Find the IP address of your phone - Pressing the + key on the left of the phone will display the IP address.
Step 2
  • Vist the IP address in a web browser. It should look something like http://192.168.1.2 in your address bar.
Step 3
  • Select 'Identity 1' on the left of the web interface, fill out the options as follows:
  • Server is local: No
  • Display Name: Your Name
  • Account: Your Account User ID
  • Password: Your Account Password
  • Registrar: Your VoIP Providers SIP Server Address (sip.myvoipprovider.co.uk)
  • Authentication Username: Your Account User ID
  • Server Port: 5060
  • Click Save.
Step 4
  • Select 'Telephony Settings' followed by 'Reboot'
After the reboot your phone should connect successfully.
Sipgate Basic and multiple SIP clients

Ok, thanks. Was worried that using the same sip user in…

Your device was probably listed on Cisco's provisioning…

This means it is very dangerous to post here other t…

https://www.ukvoipforums.com/viewtopic.php?t=58#p5950

Sign up for VIP membership