Advertisement

By Sponsor
User avatar
By WelshPaul
#200
Enter the web page of your snom. To do this, find the IP address of your telephone:

If you're using a Snom 300 phone, on the large silver button, press; down, up, tick - you will see an IP address. Type it into the web browser of a PC that is connected to the same network as your telephone.

If you're using a Snom 320, 360 or 370 just press the ? key - you will see an IP address - type it into the web browser of a PC that is connected to the same network as your telephone.

Now, click on 'Function Keys' in the yellow column on the left; this shows your options. By default you'll see a screen like this:
snom_divert_function.png
snom_divert_function.png (103.39 KiB) Viewed 178 times
You now need to set your chosen function key to 'Key Event' instead of 'Line' Then enter F_REDIRECT:xxxxxxxxxxx - Where xxxxxxxxxxx is the number to direct to. You can see how it should look here:
snom_divert_function1.png
snom_divert_function1.png (105.76 KiB) Viewed 178 times

I bet it took you about 10 secs to work it out! …

Yes changing power save mode to disable fixed it. …

Hi iantor, Have you tried setting NAT Keeplive En…

Obihai have just release a new firmware version fo…

Check out our Amazon top picks