#6242
This guide explains how to enable and disable the Call Waiting feature on the following handsets:
  • Cisco SPA303G
  • Cisco SPA501G
  • Cisco SPA502G
  • Cisco SPA504G
  • Cisco SPA508G
  • Cisco SPA509G
  • Cisco SPA512G
  • Cisco SPA514G
  • Cisco SPA525G2
From the Phone Menu

To Disable Call Waiting from the Phone Menu
  1. Press the Setting key
    This is the button with a sheet of paper with the folded corner and can be found under the envelope (voicemail) button.
  2. Press 5 for Preferences
  3. Press 16 for Call Waiting
  4. Press the y/n softkey to toggle to No
  5. Press the ok softkey to confirm
  6. Press the save softkey to save
  7. Press the cancel softkey until you return to the idle screen

To Enable Call Waiting from the Phone Menu
  1. Press the Setting key
    This is the button with a sheet of paper with the folded corner and can be found under the envelope (voicemail) button.
  2. Press 5 for Preferences
  3. Press 16 for Call Waiting
  4. Press the y/n softkey to toggle to Yes
  5. Press the ok softkey to confirm
  6. Press the save softkey to save
  7. Press the cancel softkey until you return to the idle screen

My HT801 was configured for another UK provider. I rea…

Sip to PSTN lines gateway

Hi All I am looking for a gateway that will allow a le…

Hi all! We have Cisco 7941 phones that we are battlein…

TalkTalk -residential VOIP

Do not touch it. No incomming caller ID no call rou…

Sign up for VIP membership