User avatar
By WelshPaul
Posts Signature Likes Avatar Topics
#450
This post will guide you on how to manually connect a Cisco SPA525G or Cisco SPA525G2 to a Wi-Fi network.

To do this, follow the steps below:

Step 1:
Press the Menu / Setup button on your Cisco phone.

Step 2:
Scroll to Network Configuration and press Select.

Step 3:
Highlight Wi-Fi, press the Left or Right Arrow key to toggle Wi-Fi on.

Step 4:
Press the Set soft key.

Step 5:
Scroll to Wi-Fi Configuration and press the Right arrow key.

Step 6:
Choose Wireless Profile (the current wireless profiles are displayed).

Step 7:
Press the Scan soft key.

Step 8:
In the list of available networks, scroll to the desired network and press Add to select the highlighted network.

Step 9:
Depending on your network's level of security, press the Right Arrow key under Security Mode to set the Security Options: WEP, WPA-PSK or WPA2-PSK.

NOTE: This step is optional.

Step 10:
Press Set and Connect.

IMPORTANT: You should now see the connection indicator on the device interface. An IP address should also be displayed indicating that your device is connected to the wireless network.

You have now connected your Cisco SPA525G or Cisco SPA525G2 to your wireless network.

I have two asterisk servers (1 running asterisk (box1) …

Sipgate Basic and multiple SIP clients

Ok, thanks. Was worried that using the same sip user in…

Your device was probably listed on Cisco's provisioning…

This means it is very dangerous to post here other t…

Sign up for VIP membership