Advertisement

By Sponsor
User avatar
By WelshPaul
#4689
In this guide, I'm going to show you how to register the Zoiper softphone to an OBi200 / OBi202 allowing you to make and receive calls via a mobile, tablet or PC.

The OBi200 and OBi202 allow for 4 SIP Service Provider Service Sessions, we need to utilise one in order to register a softphone to our OBi. For the purpose of this guide, I'm going to setup the Zoiper softphone on a Windows 10 PC. Both ITSP PROFILE A and SP1 are configured for use with Voicehost, my OBi's IP address is 192.168.1.6. With this kind of setup, I can register up to three softphones to my OBi.

OBi202 / OBi200 Configuration:
  • Service Providers -> ITSP Profile B -> SIP -> ProxyServer: 127.0.0.1
  • Service Providers -> ITSP Profile B -> SIP -> X_SpoofCallerID: (checked)

    ITSPB.png
    OBi202 ITSP Profile B
    ITSPB.png (44.16 KiB) Viewed 1077 times
  • Voice Services -> SP1 Service -> X_InboundCallRoute: {SP2([email protected]_client),ph,ph2}

    SP1.png
    OBi202 SP1 Service
    SP1.png (19.91 KiB) Viewed 1077 times
  • Voice Services -> SP2 Service -> X_ServProvProfile: B
  • Voice Services -> SP2 Service -> X_InboundCallRoute: {1001>(Msp1):SP1}
  • Voice Services -> SP2 Service -> X_RegisterEnable: (unchecked)
  • Voice Services -> SP2 Service -> X_UserAgentPort: 5061
  • Voice Services -> SP2 Service -> X_Proxy: (checked)
  • Voice Services -> SP2 Service -> AuthUserName: 1001
  • Voice Services -> SP2 Service -> AuthPassword: 1001

    SP2.png
    OBi202 SP2 Service
    SP2.png (50.74 KiB) Viewed 1077 times
Zoiper configuration:
  • Accounts > General > Domain: 192.168.1.6:5061
  • Accounts > General > Username: 1001
  • Accounts > General > Password: 1001
  • Accounts > General > Auth. username: 1001

    zoiper_accounts.png
    Zoiper Accounts
    zoiper_accounts.png (15.4 KiB) Viewed 1086 times
  • Accounts > Advanced> STUN options:
    • Server Hostname/IP: stun.zoiper.com
    • Port: 3478
    • Refresh period: 30

      zoiper_accounts_advanced.png
      Zoiper Accounts Advanced
      zoiper_accounts_advanced.png (20.66 KiB) Viewed 1085 times
  • Advanced > Network > Enable STUN: (unchecked)

    zoiper_advanced.png
    Zoiper Advanced
    zoiper_advanced.png (16.14 KiB) Viewed 1086 times
I can now successfully make and receive calls via my OBi device and Voicehost (my VoIP service provider) using the Zoiper softphone on my Windows 10 desktop PC.

Zoiper.png
Zoiper
Zoiper.png (15.84 KiB) Viewed 1086 times
Converting from POTS to VOIP

I've seen some people in the USA using their exi…

I just seen this thread over on the Voipfone User …

Hi, This might be in the wrong topic, so feel free…

CISCO 7841- INSTALL SIP FIRMWARE

Hey @Alexander01 sorry for the late reply (I h…

Sign up for VIP membership