Advertisement

By Sponsor
User avatar
By @UKVoIPForums
#5127
The “Product Information” status on your OBIHAI device shows some basic product information, as well as the system up-time with the last reboot reason code in parenthesis. The reboot reason codes are defined below.

Reboot Reason Codes:
0: Reboot on Power Cycle
1: Operating System Reboot
2: Reboot after Firmware Update via provisioning or phone (***6)
3: Reboot after New Profile Invoked
4: Reboot after Parameter Value Change or Firmware has changed and invoked via device web page
5: Reboot after Factory Reset using the OBi device hardware pin
6: New Profile Invoked AND Profile URL Changed
7: Reboot from SIP Notify (Reserved)
8: Reboot from Telephone Port (IVR)
9: Reboot from Webpage - No change in parameter value(s) or firmware
10: Reboot During OBiTALK Signup
11: Reboot During OBiTALK Signup
12: Reboot after DHCP server offers IP, GW-IP and/or Netmask different from what the OBi device is currently using
13: Reboot on Data Networking Link Re-establishment
18: Reboot on WAN IP address change (OBi202/OBi302 only)
19: Reboot on LAN IP address change (OBi202/OBi302only)

@timlinc you're most welcome. :thumbsup: A…

Ok so having read the manual (which can be found …

Recommendation for voicemail

Hi All, i have the panasonic kx-ta824/kx-tes824 s…

I have been using VoIP for years. I've mainly used…

Sign up for full membership