- Sat 8th Feb 2014, 19:32
#250
- Appreciate my support? Feel free to buy me a coffee.
- Voipfone are offering you the chance to trial their VoIP service for free for 30 days. Sign me up!
- Tired of shared hosting? You're not alone! Grab a high performance server and get $100 in free credit. Sign me up!
What are the UK regional settings for OBihia adapters and telephones?
If you have purchased an OBihai SIP adapter or telephone it will come configured for the US telecom system as standard. This means they will have US style tones, sounds and that some UK phone features may not work correctly unless we make some configuration changes in the settings menu of the device.
First you will need to login to your OBihai SIP adapter or telephone's web based GUI by typing the IP address of the device into your web browser. (There is no need to enter "http://" before the IP address.) If prompted enter the username and password to complete the process, you should now have access to the devices Web based GUI, from here you can configure and setup your device for use with your VoIP provider.
---
Below you will find the correct regional configuration settings for use in the UK, You may need to be logged in with administrator privileges to view and change these settings.
Router Configuration ---> WAN Settings
If you have purchased an OBihai SIP adapter or telephone it will come configured for the US telecom system as standard. This means they will have US style tones, sounds and that some UK phone features may not work correctly unless we make some configuration changes in the settings menu of the device.
First you will need to login to your OBihai SIP adapter or telephone's web based GUI by typing the IP address of the device into your web browser. (There is no need to enter "http://" before the IP address.) If prompted enter the username and password to complete the process, you should now have access to the devices Web based GUI, from here you can configure and setup your device for use with your VoIP provider.
---
Below you will find the correct regional configuration settings for use in the UK, You may need to be logged in with administrator privileges to view and change these settings.
Router Configuration ---> WAN Settings
Code: Select all
Physical Interfaces ---> PHONE1+2 Port
System Management:
LocalTimeZone: GMT+00:00(London,Lisbon)
DaylightSavingTimeEnable: Yes
DaylightSavingTimeStart: 3/-1/7/2:0:0
DaylightSavingTimeEnd: 10/-1/7/2:0:0
DaylightSavingTimeDiff: 1:0:0
Code: Select all
Physical Interfaces ---> LINE Port
Ringer:
RingFrequency: 25
Port Settings:
OnHookTipRingVoltage: 50
OffHookCurrentMax: 25
Impedance: 370+(620||310 nF)
CallerIDMethod: FSK(V.23)
CallerIDTrigger: Before First Ring
Timers:
HookFlashTimeMax: 200
HookFlashTimeMin: 60
CPCDelayTime: 2000
CPCDuration: 100
DigitMapLongTimer: 6 <--- Optional, this is more of a personal choice of mine. Leave at default value if you wish!
Code: Select all
Tone Settings ---> Tone Profile A+B
Line Port:
DigitMap: (999|112|101|111|17070|116000|116111|116123|1471|1571|0[15]xxxxxxxxx?|0[27]x xxxx xxxx|0800xxx xxxx?|0808xxx xxxx|08001111|08[47]x xxx xxxx|0845464x|03xx xxx xxxx|118xxx|100|155|195|09xx xxx xxxx|[2-8]xxxx.|9[0-8]xxx.|99[^9]xx.|00xxx.|xx.)
RingDelay: 400
PSTN Disconnect Detection:
DetectCPC: Yes
CPCTimeThreshold: 90
DetectPolarityReversal: No
DetectFarEndLongSilence: Yes
SilenceDetectSensitivity: High
SilenceTimeThreshold: 30
DetectDisconnectTone: Yes
DisconnectTonePattern: 400-30;2
Port Settings:
ACImpedance: 370+620||310nF
OnHookSpeed: 3ms (ETSI)
CurrentLimitingEnable: Yes
CallerIDDetectMethod: FSK(V.23)
Ring Detection:
RingFrequencyMin: 10
RingFrequencyMax: 100
RingThreshold: 13.50-16.50
RingValidationTime: 256
RingIndicationDelayTime: 0
RingTimeout: 128
RingerImpedance: High
Code: Select all
Ring Settings ---> Ring Profiles A+B
Dial Tone:
ToneName: Dial Tone
TonePattern: 350-19,440-22;10
Ringback Tone:
ToneName: Ringback Tone
TonePattern: 400-20,450-20;-1;(.4+.2,.4+2)
Busy Tone:
ToneName: Busy Tone
TonePattern: 400-20;10;(.375+.375)
Reorder Tone:
ToneName: Reorder or Fastbusy Tone
TonePattern: 400-20;10
Holding Tone:
ToneName: Holding Tone
TonePattern: 600-20;-1;(.1+.1,.1+.1,.1+2.2)
Second Dial Tone:
ToneName: Second Dial Tone
TonePattern: 420-19,520-22;10
Stutter Tone:
ToneName: Stutter Tone
TonePattern: 350-19,440-22;10;(.75+.75)
Howling Tone:
ToneName: Howling Tone
TonePattern: 480+3,620+3;300;(1/.2+0,2/.2+0)
Prompt Tone:
ToneName: Prompt Tone
TonePattern: 520-19,620-22;10
Call Forwarded Dial Tone:
ToneName: Call Forwarded Dial Tone
TonePattern: 350-19,440-22;10;(.75+.75)
DND Dial Tone:
ToneName: DND Dial Tone
TonePattern: 350-19,440-22;10;(.75+.75)
Conference Tone:
ToneName: Conference Tone
TonePattern: 350-22;10;(.1+.1,.1+9.7)
SIT Tone 1:
ToneName: SIT Tone 1
TonePattern: 950-16,1400-16,1800-16;20;(1/.330+0,2/.330+0,4/.330+0,0/0+4)
Outside Dial Tone:
ToneName: Outside Dial Tone
TonePattern: 420-22;10
Code: Select all
Call Waiting Tone 1:
ToneName: UK-1
TonePattern: 400-20;30;(.1+2)
Call Waiting Tone 2:
ToneName: UK-2
TonePattern: 400-20;30;(.25+.25,.25+.25,.25+5)
Ring Pattern 1:
RingName: UK-1
RingPattern: 60;(.4+.2,.4+2)
Ring Pattern 2:
RingName: UK-2
RingPattern: 60;(1+2)
Ring Pattern 3:
RingName: UK-3
RingPattern: 60;(.25+.25,.25+.25,.25+1.75)
Ring Pattern 4:
RingName: UK-4
RingPattern: 60;(.4+.8)
Ring Pattern 5:
RingName: UK-5
RingPattern: 60;(2+4)
- Appreciate my support? Feel free to buy me a coffee.
- Voipfone are offering you the chance to trial their VoIP service for free for 30 days. Sign me up!
- Tired of shared hosting? You're not alone! Grab a high performance server and get $100 in free credit. Sign me up!
How did this post make you feel?