User avatar
By WelshPaul
Posts Signature Likes Avatar Topics
#5007
A custom PK insert label template suitable for the OBi1000e sidecar. This template was created with Microsoft Word 2017.

Instructions:
  1. Download the zip file containing the template file here.
  2. Open the template file using Microsoft Word
  3. Edit the template to suit your requirements
  4. Print the modified template
  5. Cut along the dotted lines for a perfect fit
  6. Slide the PK label into the sidecar slot
Phone Configuration:
Navigate to the IP Phone > Side Car X page and configure to meet your own requirements. Don't forget to save the new configuration and reboot the phone.
OBi1000e Sidecar PK Label Template
OBi1000e Sidecar PK Label Template
OBi1000e_Template.png (13.65 KiB) Viewed 1532 times
User avatar
By WelshPaul
Posts Signature Likes Avatar Topics
#5008
A modern looking PK insert label* suitable for use with the OBi1000e sidecar. This template was created with Microsoft Word 2017.

Instructions:
  1. Download the zip file containing the template file here.
  2. Open the template file using Microsoft Word
  3. Edit the template to suit your requirements
  4. Print the modified template
  5. Cut along the dotted lines for a perfect fit
  6. Slide the PK label into the sidecar slot
Phone Configuration:
Navigate to the IP Phone > Side Car X page and configure to meet your own requirements. Don't forget to save the new configuration and reboot the phone.
OBi1000e Sidecar PK Label Template Black
OBi1000e Sidecar PK Label Template Black
obi1000e_template_black.png (6.11 KiB) Viewed 1525 times

I have two asterisk servers (1 running asterisk (box1) …

Sipgate Basic and multiple SIP clients

Ok, thanks. Was worried that using the same sip user in…

Your device was probably listed on Cisco's provisioning…

This means it is very dangerous to post here other t…

Sign up for VIP membership