These can be a real hurdle when setting up VoIP, help others by posting your configs, tips and tricks or simply ask others for help if you're stuck.
User avatar
By WelshPaul
Posts Signature Likes Avatar Topics
#22
From my experience, Firewall Traversal is one of the biggest stumbling blocks new users experience when getting started using VoIP. There is no dead giveaway when it happens. Things just don't work as expected.

By nature (for security reasons), firewalls block all but essential "ports" that your PC requires to browse the Internet. So, when you start installing VoIP softphones and VoIP hardware adapters (ATA), they often don't work because your firewall is blocking the "special" dedicated communication ports that the VoIP services need to communicate through.

Most people now days have NAT Routers and these routers also have built-in Firewalls.

So now, if your PC is behind a NAT Router, you may have two firewalls to traverse, if you are using a SoftPhone. First, your VoIP packets have to traverse the hardware NAT Router, then they have to traverse the PC software based firewall, such as Windows Firewall, or your pc security software like Norton, McAfee, etc.

Part 2 can be found here.
0

So, I have been using the Andrews & Arnold SIP2…

It's an annoyance that I have experienced many times my…

Yea send me the full PCAP file. You can email it to ad…

Ubiquity has announced a security incident that may hav…

Sign up for VIP membership