Get help with installing, upgrading and running a PBX such as Asterisk.

Advertisement

By Sponsor
By tonys102
#3860
Hi All,

I am connecting an asterisk to a Pansonic, and am getting 1 way voice. The SIP config is correct, so
asterisk = 172.16.10.196
Panasonic = 172.16.20.1

It's a flat network.
The RTP from the Panasonic comes from 172.16.20.2 (which is the IP address of the DSP), but the asterisk is sending to the main IP address. I can hear the voice from the Panasonic, but they can't hear me - because of the above.

Any Panasonic guru's who can advise what needs to be changed.?

Advertisement

By Sponsor
User avatar
By WelshPaul
#3861
Have a read of this: http://www.voicesonic.com/panasonic/man ... NCPxxx.pdf

Never liked any of the Panasonic stuff myself, put both on the same subnet/IP range of 172.16.10.x

OK, I have updated my original post. File contents…

Hi Everyone - new to the group - relativley new to…

Snom UK XML Dialplan File v1.2

*** Latest version *** Attached below yo…

Their UK telephone number is +44 (0)20 369 5311…

Check out our Amazon top picks