User avatar
By WelshPaul
#4506
Purchased a Grandstream telephone adaptor?
If you have purchased a Grandstream telephone adaptor (ATA), it will come configured for the US telecom system as standard. As such, it will play back US style tones, sounds and some UK phone features may not work correctly unless you make some configuration changes via the devices web based GUI.

What are the UK regional settings for the Grandstream telephone adaptors and how do I implement them?
Login to your Grandstream telephone adaptors web based GUI by typing the IP address of the device into your web browser. (There is no need to enter "http://" before the IP address.) If prompted enter the username and password to complete the process, you should now have access to the devices Web based GUI, from here you can configure your device with the correct regional configuration settings for use in the UK.

As an example, on the Grandstream HT812 configure with the following:
  • Navigate to the BASIC SETTINGS page:
    • Self-Defined Time Zone: GMT0BST,M3.5.0/1,M10.5.0
  • Navigate to the ADVANCED SETTINGS page:
    • System Ring Cadence: c=400/200-400/2000;
    • Dial Tone: f1=350@-19,f2=440@-22,c=0/0;
    • Ringback Tone: f1=400@-20,f2=450@-20,c=400/200-400/2000;
    • Busy Tone: f1=400@-20,c=375/375;
    • Reorder Tone: f1=400@-20,c=400/350-225/525-0/0;
    • Call Waiting Tone: f1=440@-20,c=300/10000-300/10000-0/0;
    • Prompt Tone: f1=520@-19,f2=620@-22,c=0/0;
    • NTP Server: uk.pool.ntp.org
  • Navigate to the PROFILE 1/2 page(s):
    • Dial Plan: {100|101|111|112|155|195|999|116xxx|116111|116123|118xxx|1471|157[1-2]|08001111|0845464x|0[1235789]xxxxxxxxx|00xxx.|x+|\+x+|*x+|*xx*x+}
    • SLIC Setting: uk
    • Caller ID Scheme: sin 227 - bt
    • Hook Flash Timing: Minimum: 60 Maximum: 200
    • Ring Frequency: 25
    • Ring Tone 1: c=400/200-400/2000;
    • Ring Tone 2: c=400/200-400/2000;
    • Ring Tone 3: c=400/200-400/2000;
    • Ring Tone 4: c=400/200-400/2000;
    • Ring Tone 5: c=400/200-400/2000;
    • Ring Tone 6: c=400/200-400/2000;
    • Ring Tone 7: c=400/200-400/2000;
    • Ring Tone 8: c=400/200-400/2000;
    • Ring Tone 9: c=400/200-400/2000;
    • Ring Tone 10: c=400/200-400/2000;
Remember to click on the "Update" and "Apply" buttons located at the bottom of every page to save and activate the changes.
Who is online

Users browsing this forum: No registered users and 0 guests

Supported Products: OBi1062 Professional OBi1…

Sorry I mean to say if I do not stop autoboot the …

How to Evaluate an IP Phone System?

CISCO SPA500S

Create a call group and add the three extensions t…