Get help with installing, upgrading and running a PBX such as Asterisk.
0
User avatar
By WelshPaul
Posts Signature Likes Avatar Topics
#5367
Create a new VoIP provider in 3cx (using any of the provider templates) then configure with the following:
  • Sip Server Hostname or IP: sip.soho66.co.uk
  • Sip server port: 8060
  • Outbound proxy Hostname or IP: sip.soho66.co.uk
  • Outbound Proxy Port (default is 5060): 8060
  • STUN Server: stun.soho66.net
Enter your Soho account information in the following fields:
  • External Number: ***ENTER THE DID NUMBER HERE***
  • Authentication ID: ***ENTER YOUR VOIP USERNAME HERE***
  • Authentication Password: ***ENTER YOUR VOIP PASSWORD HERE***
  • Max Simultaneous Calls: 2
You should have been given by Soho66 (probably by email) details of your VoIP Username & Password.
VoipIT liked this
0
User avatar
By Service2u
Posts Avatar
#6273
Hi

I have been trying to configure 3cx with my soho66 account but am unable to get it to make outgoing calls

i am using the latest version of 3CX (V16.0.8.9) on a windows 10 Machine

I have tried a few different templates using the info above but cant seem to get it to work

Please could anyone help?

Thanks

Mark
0
Cisco 8841 3PCC

Before we go any further... Can you verify that the d…

VIP Membership

Good stuff, I see it now. Thanks @WelshPaul !

You can register multiple devices against the same SI…

I'm sure this is a config problem as it affects 3 off S…

Sign up for VIP membership