1. Am I allowed to do this, as I'm not making an emergency call?
2. Is it permissible/acceptable to say that it is a test call?
3. What else should I say (or not say) to the emergency operator?
Find answers, share answers, discuss.
RayKahl wrote:1. Am I allowed to do this, as I'm not making an emergency call?Absolutely not - the 999 people will get very upset with you for wasting their time, putting others at risk and your voip provider will get a formal complaint for allowing it (though how they can prevent you I've no idea).
RayKahl wrote:2. Is it permissible/acceptable to say that it is a test call?See 1
RayKahl wrote:3. What else should I say (or not say) to the emergency operator?See 1
WelshPaul wrote:I am curious as to why someone would want to test 999 in particular.Paul, it's a matter of due diligence. Not so much for me as an individual subscriber, but for any organisation installing a PBX there is usually a requirement to demonstrate to the customer that 999 actually works. You never know, there may be an unforeseen glitch in the dialplan that prevents it working.
SteveAtVoIP2Go wrote:the Customer could place the account 'on test' for a certain period of time, say 10 minutesBe careful how you implement this, too short a time, or if time flies by, your customer will end up calling 999 for real. There is also a case of "what if"! What if an emergency happens for real during this test period? Nobody is going to be able to dial 999 for real.
Its back again at same price about $74 plus local Taxes…
The GRANDSTREAM HANDYTONE 801 is just an analogue telep…
If porting to Sipgate, it's probably better to port to…
In the FreePBX GUI create an outbound route called emer…