Get help with installing, upgrading and running a PBX such as Asterisk.
User avatar
By WelshPaul
Posts Signature Likes Avatar Topics
Below is a copy of my Andrews & Arnold PJSIP settings that I use with FreePBX v15.0.17.12. :nerd:

First thing you will need to do is enable the "SIP Channel Driver" to use both chan_sip and chan_pjsip. You can do that by navigating to the Settings > Advanced Settings configuration page and scrolling down until you see the "SIP Channel Driver" setting. Make sure that "both" is selected in the dropdown box. If it isn't, make the change and click "Submit" to save it and then "Apply Changes" to implement it.

Now that's out of the way, let's create a Voipfone PJSIP Trunk...
  1. Navigate to Connectivity > Trunks > + Add Trunk > Add SIP (chan_pjsip) Trunk page.
    You should be at the following screen:
  2. Under the "General" tab section make the following changes:
    • Trunk Name = AAISP-(441234567890)
    • Outbound CallerID = (PHONE_NUMBER)
    It should look something like this:
  3. Click on the "pjsip Settings" tab and in the "General" tab section make the following changes:
    • Username = (ACCOUNT)
    • Secret = (PASSWORD)
    • Authentication = Outbound
    • Registration = Send
    • Language Code = English - United Kingdom
    • SIP Server =
    • SIP Server Port = 5060
    • Context = from-trunk
    • Transport =
    Again, it should look like this:
  4. While still in the "pjsip Settings" tab click on the "Advanced" tab and make the following changes:
    • DTMF Mode = RFC 4733
    • Forbidden Retry Interval = 20
    • Fatal Retry Interval = 20
    • General Retry Interval = 20
    • Expiration = 60
    • Qualify Frequency = 20
    • Contact User = (ACCOUNT)
    • From Domain = (YOUR_IP)
    • From User = (ACCOUNT)
    • Client URI = sip:(ACCOUNT)
    • Server URI =
    • AOR Contact = sip:(ACCOUNT)
    • Match (Permit) =
    You can leave the rest at their defaults. It should look like this:
  5. Click on the "Codec" tab and select the following codecs:
    • alaw
    • ulaw
    Again, it should look like this:
  6. Finally click on the "Submit" button to save your changes and then "Apply Changes" to implement them.

Additional information on how to convert extensions from chan_sip to chan_pjsip can be read here: WelshPaul @ FREEPBX - New tool to assist converting from SIP to PJSIP

NOTE: Replace the following (in the above configuration) with your real Andrews & Arnold credentials:
  1. (ACCOUNT) = Your Andrews & Arnold phone number in international format (+441234567890).
  2. (PASSWORD) = Your Andrews & Arnold SIP Password. Your SIP Password can be found in the Andrews & Arnold Control Pages under the "Outgoing" tab.
  3. (YOUR_IP) = Your IP Address (Find it here: Settings > Asterisk SIP Settings > NAT Settings > External Address)
User avatar
By WelshPaul
Posts Signature Likes Avatar Topics
Below is my Dial Number Manipulation Rules. You can use mine or you can use your own custom rules! If you use mine, make sure that you replace 01792 with your own area code.

Dial Number Manipulation Rules:
  • Prepend: 01792 Prefix: match pattern: NXXXXX
  • Prepend: 14101792 Prefix: 141 match pattern: NXXXXX
  • Prepend: 147001792 Prefix: 1470 match pattern: NXXXXX

It's an annoyance that I have experienced many times my…

Yea send me the full PCAP file. You can email it to ad…

Ubiquity has announced a security incident that may hav…

Use the files contained in the zip file to configure th…

Sign up for VIP membership