HELLO & WELCOME

[mgray]

Do any of the experts here know how to set the outgoing line with speed dial. I am using SPA 504G with attendant console and have four lines UK US France and Australia sip lines The SD fnc=sd;ext=+XXXXXX will always dial with the first line - I would like to add a string (if it exists) to select the outgoing line. Any ideas?

[WelshPaul]

Just add vid=# to the end of your speed dial syntax.
(Replace # with 1 for EXT 1 or 2 for EXT 2 etc)

Example:

Code: Select all

fnc=type;sub=stationname@$PROXY;ext=extension#@$PROXYvid=#

[mgray]

This does not seem to work since I am not using PBX - I have tried both fnc=sd;ext=08003890622vid=2 and fnc=sd;ext=08003890622;vid=2 andfnc=sd;ext=08003890622@vid=2 but SPA still defaults to line 1. Any other ideas?

[mgray]

I've also trries putting the vid=2 before the ext= with no luck!

[WelshPaul]

Have you tried simply modifying the "ext" syntax to use the domain or ip of your preferred VoIP provider?

Lets say EXT 1 is configured to use Voipfone and EXT 2 is using Sipgate then maybe try:

Code: Select all

fnc=sd;ext=123@sipgate.co.uk

Press the speed dial button and it should dial 123 over Sipgate.