User avatar
By WelshPaul
Posts Signature Likes Avatar Topics
#4808
Below you will find the contents of the XMLDefault.cnf.xml file that is required in order to successfully upgrade (or downgrade) your Cisco 8800 series IP phone firmware. The file contents below is for use with SIP Firmware 11.7(1), it can be used with other firmware versions but you must first replace all instances of "sip88xx.11-7-1-17".

Example: If you want to downgrade your Cisco 8800 series IP phone from 11.7(1) to 11.0(1) then first download the 11.0(1) firmware from here and extract it to your desktop. Open the folder that was created when unzipping the firmware file and look for a file that ends with ".loads", in this instance, it will be named "sip88xx.11-0-1-11.loads". Now rename all instances of "sip88xx.11-7-1-17" located in the XMLDefault.cnf.xml below with "sip88xx.11-0-1-11" and place the file in your TFTP directory along with the required firmware files.

XMLDefault.cnf.xml
Code: Select all
<Default>
<autoRegistrationName>AUTO-REG</autoRegistrationName>
<autoRegistration>disabled</autoRegistration>
<selfProvisioningSecureMode>true</selfProvisioningSecureMode>
<adminProvisionMode>false</adminProvisionMode>
<ipAddressMode>0</ipAddressMode>
<ipPreferenceModeControl>0</ipPreferenceModeControl>
<ipMediaAddressFamilyPreference>0</ipMediaAddressFamilyPreference>
<callManagerGroup>
<name>Default</name>
<tftpDefault>true</tftpDefault>
<members>
<member priority="0">
<callManager>
<name>cucmpub1</name>
<description>cucmpub1</description>
<ports>
<ethernetPhonePort>2000</ethernetPhonePort>
<sipPort>5060</sipPort>
<securedSipPort>5061</securedSipPort>
<mgcpPorts>
<listen>2427</listen>
<keepAlive>2428</keepAlive>
</mgcpPorts>
</ports>
<processNodeName>cucmpub1</processNodeName>
</callManager>
</member>
</members>
</callManagerGroup>
<TVS>
<members>
<member priority="0">
<port>2445</port>
<address>cucmpub1</address>
</member>
</members>
</TVS>
<loadInformation36217  model="Cisco 8811">sip88xx.11-7-1-17</loadInformation36217>
<loadInformation683  model="Cisco 8841">sip88xx.11-7-1-17</loadInformation683>
<loadInformation684  model="Cisco 8851">sip88xx.11-7-1-17</loadInformation684>
<loadInformation685  model="Cisco 8861">sip88xx.11-7-1-17</loadInformation685>
</Default>
UK mobile integration with a SIP PBX

Would this service be useful for original poster a…

It is about 2 years since original poster but can …

Hi J, Check out this post by @GoofyCyborg . …

Hi folks, I'm selling a used Cisco SPA 303 3-Line …

Sign up for VIP membership