Discuss, review and recommend UK broadband internet services from providers such as BT, Virgin Media and Sky here.
0
#5336
The -48 V power supply cannot be used when the Huawei MA5616 uses the PAIB power board.

PAIB is an AC input power board and uses AC power supply by default. Its DC terminal is connected to -48 V battery. PAIB is installed with a relay for protecting the battery and the relay turns on the circuit to the -48 V battery for power supply only when the mains supply fails. In this case, if PAIB of the MA5616 requires DC power supply, mains supply must be connected and then powered off. If the mains cannot be connected, PAIB must be replaced with PDIA
0

Hi Tony, I have just found that in the FAQ as well, se…

PSTN (analogue Phone line) to PBX

Hi, You/I need to think about FXO and FXS ports, see h…

Sip to PSTN lines gateway

Hi Dean, This product from Patton could be good for yo…

A Hook Flash is nothing more than hanging up and picki…

Sign up for VIP membership