If it's about VoIP, SIP or Internet Telephony but it doesn't seem to fit anywhere else, post it here.

Advertisement

By Sponsor
User avatar
By ming1340
#5434

Hello every body,

I am newbies here and i meet the problem on FoIP message. I would like to discuss about the FoIP Message is abnormal or not if the "m=image 0 udptl t38 " ? If the Port = 0 , is it mean that we can't make the session between me and remote end ?

Here is the full message :
CSeq: 1 INVITE
Contact: <sip:172.26.34.117:5060>
Supported:
Allow:ACK,BYE,CANCEL,INFO,INVITE,OPTIONS,PRACK,REFER,NOTIFY,UPDATE
Accept:application/dtmf-relay,application/media_control+xml,application/sdp,application/x-broadworks-call-center+xml,multipart/mixed
Content-Type: application/sdp
Content-Length: 267

v=0
o=BroadWorks 167077 2 IN IP4 172.26.34.117
s=-
c=IN IP4 172.26.34.117
t=0 0
m=audio 20434 RTP/AVP 8
a=sendrecv
a=rtpmap:8 PCMA/8000
a=ptime:20
m=image 0 udptl t38 :devil:
a=T38FaxVersion:0
a=T38FaxRateManagement:transferredTCF
a=T38FaxUdpEC:t38UDPRedundancy

Thank you.

Advertisement

By Sponsor
User avatar
By WelshPaul
#5436

Hi @ming1340 ,

While i'm no fax guru, everything looks normal in the above INVITE. :thumbsup:

ming1340 wrote:

If the Port = 0 , is it mean that we can't make the session between me and remote end ?

No, I don't believe that is not what it means.

Hello, It could be the SPA122 that's faulty, the …

VOIP JOB needed

This is an independent VoIP forum, we are not a Vo…

Newbie help!

I recommend Voipfone! They offer a pay go service …

Gigaset N300A IP

@VoipIT I doubt it. From my understanding ther…

Sign up for full membership