VoIP hardware is developing fast - this is where you ask all those “how do I make my SIP Telephone, Adapter or Asterisk box work with my voip provider?” questions.
User avatar
By AvidPontoon
Posts Avatar Topics
#5733
Hi All!

I bought an SPA514G from eBay that was ‘locked’ to Vodafone but I have been able to add it to my PBX with no issues.

The problem is the device says customisation: Vodafone. And will try and provision itself every once in a while, is there any way I can reset the customisation?

Factory resets and firmware upgrades do not help!

Thanks
0
User avatar
By VoipIT
Posts Avatar
#5736
AvidPontoon wrote:is there any way I can reset the customisation?
When you say reset customisation do you mean flash back to factory stock Cisco firmware? If that is what you meant then the answer is no you cannot. :frowning2:

Vodafone SPA514G user guide:
https://onenet.vodafone.com/infoSiteCon ... e_v2_1.pdf
0
0
User avatar
By WelshPaul
Posts Signature Likes Avatar Topics
#5739
It's likely the only way to flash these with Cisco's stock firmware is via JTAG but i'm not aware of anyone doing it, let alone posting a how to unfortunately.
0

So it turns out that the v1 software is unobtainab…

Odd 'calls' I can't answer?

Thank you so much for the details. I also get this…

How to Change Skype Ringtone?

When I set up Skype on my mobile device which is a…

I would like to set up new fax service in my offic…

Sign up for VIP membership